Home > Buy Now > Other Organic Chemicals > IRIS-400 Wire-Rope Adding Friction Grease (Koepe Oil)
 


IRIS Technology( YangZhou)Co.,Ltd
 
icon Products

line

icon Company Profile
icon Selling Leads

line

 
Contact us
IRIS Technology( YangZhou)Co.,Ltd
[China]
Address:
5 West Wenhui Road,Yangzhou City,Jiangsu Province,P.R.of China Yangzhou Jiangsu 225009 China
Phone:
86-0514-87761235
Contact name:
Liu Fangjie
Inquire now










IRIS Technology( YangZhou)Co.,Ltd



 
Products

IRIS-400 Wire-Rope Adding Friction Grease (Koepe Oil)

Inquire now

IRIS-400 Wire-Rope Adding Friction Grease (Koepe Oil)

Click to enlarge image

 Model Number IRIS-400

IRIS-400 Wire-Rope Adding Friction Grease (Koepe Oil)
 
Product introduction】IRIS -400 is the high quality grease lubricant refined by the high quality colophony, antirust, adding friction agency, stabilizer and the coupler and it has high friction coefficient and good adhesive force and antirust. It applies to the protection between the rope and the liner of the port friction lifer with high technology requirement. The products are:  IRIS 400 wire-rope adding friction grease, which can substitute for NYROSTEN N113, ELASKON Ⅱstar. And IRIS—400M wire-rope adding friction maintain oil, which can substitute for NYROSTEN N113FS, ELASKON Ⅲstar.
 
The characteristics of the products
1. With high friction coefficient, IRIS-400 can be up to the “Mine Safety Regulations” and the relevant technology requirements. And it also has passed the inspection of the authorized organizations by the National Safe Production Supervision Bureau.
2. The strong adherence can significantly reduce splashing oil of the wire rope during the high-speed movement.
3. The good antirust effect can effectively prolong the usage life of the wire rope.
4. The high dropping point can fit the wide temperature requirements of the wire rope for mining.
 
【Quality index】
 
Item
Main  Index
IRIS 400
IRIS 400M
 Appearance
Yellow Ointment
Yellow Fluid Paste
 Droppoint,℃    ≥
90
 Flash point ℃  ≥
220
35
 Adherence rate,(at 25℃),% ,≥
0.95
 Breakpoint (75g/m2)
-30
 Proc.temp,℃
100~130
0~30
 Salt spray test(steel flake , 50μm)
200h
 Moist heat test(steel flake, 30d)
Qualified
 Friction coefficient(at 20℃)≥
0.33
 Friction coefficient(at 30℃)≥
0.25



Inquire now